m&swjr

  1. jamiepage

    G3 0-4-4T 'Project' based

    A few years ago, someone came up with the splendid idea of using the tried and tested G1MRA 'Project' design as a basis for a small G3 loco. Specifically, the 0-4-4T layout was put forward as a straightforward concept. The idea especially appealed, because the various G1 Projects I have seen...
  2. jamiepage

    G3 3 plank dropside wagon

    Herewith a few snaps of plastic masters for resin moulding. The M&SWJR owned a few 3 plank dropside/ ballast wagons that appeared to be pretty much identical to MR D305, so with available photos plus some superb MR drawings kindly sourced by AndyB it has been possible to arrive at something...
  3. jamiepage

    Load for implement wagon

    As a bit of light relief from loco building, I have started a load for my MSWJR Flat wagon No 211. I was looking for something a bit different, something that would allow a bit of colour, and if possible something that wouldn't cover up all the wagon's planking. The last was quite important...
  4. jamiepage

    A small G3 loco

    Over the winter I sketched out the idea of a small live steam G3 loco specifically designed for R/C shunting rather than high speed express running; and also to use as many off the shelf components as possible in its construction without compromising overall accuracy too much. The prototype...
  5. jamiepage

    G3 Coach Build

    The resin coach sides are to all intents and purposes finished but the coach building continues. Do you mind an occasional update of progress? From a selfish perspective I must admit to finding 'show and telling' a good motivation to progress, but bit concerned the subject is a bit too far off...
Top