1/32 class 25 3 D print

Discussion in 'G1/32' started by D6356, 29 November 2019.

  1. simon br blue

    simon br blue Member

    I used Vallejo model air Chrome yellow with a drop of orange added to brighten it up a bit. The blue is Life color Rail Blue. I’ll use some clear plasticard for the windows and head code panel, I will probably add the white dots to the inside and the spray over the back with black. Not done anything on the 25 recently, the next job will be to finish off the buffer beam pipe work but I can’t decide weather to have flexible pipes to connect with wagons using magnets.
     
  2. Simon

    Simon Flying Squad

    That is a fantastic piece of work, it really looks the part.

    Looking forward to seeing more, but I know that these things can take a long time, a very long time....

    Simon
     
    D6356 likes this.
  3. simon br blue

    simon br blue Member

    A bit more progress this week, finished the first bufferbeam. Multi working sockets printed on Form 2 with elastic cables. WSF vac and steam pipes. Air pipe fittings printed on Form 2 with elastic hoses, Main air pipe is fitted with a magnet to allow connecting to wagons. Coupling by Dingler from Ebay.

    [​IMG]1:32 Class 25/1 by simon br blue, on Flickr

    [​IMG]1:32 Class 25/1 by simon br blue, on Flickr

    [​IMG]1:32 Class 25/1 by simon br blue, on Flickr
     
    soo4513, D1054, chrisb and 17 others like this.
  4. D6356

    D6356 Western Thunderer

    Simon,
    Followed your lead on the couplings - great service from Germany just 48 hours and glaring at me to fit them. Great paint finish on the model, not sure if mine will be as good but also in rail blue.
    Robert