Brushs Laser Cutting and 3d Printing workbench

Steph Dale

Western Thunderer
I'm in the fortunate position of having a decent sized desk to work from - even if I do only actually have access to about a 10"x8" rectangle of it most of the time, so I'm afraid not. If I were still working on the metaphorical dining room table I'd definitely be up for one though.

Steph
 

BrushType4

Western Thunderer
I keep being asked if I’ll do the 7mm kits in the smaller scales. At the Doncaster Guild 0 Show last weekend I took an order for a 4mm version of the popular LNER PW hut.

Several failed attempts later and having the opportunity to model kits in the garden while we have the nice weather...

SxD+V7sIT7ej0LNR8xetzA.jpg


here is the first kit built up and covered with a coat of concrete.
XtzROXwPQtSAAMZLMdxgTA.jpg 5rsSvNo7Sb+a72+B3rKiyQ.jpg HB1%TzC+T+yh5SUFxQlFsg.jpg Yiw7WVNLS3KJ%JinRu6Ptw.jpg
 

adrian

Flying Squad
I took an order for a 4mm version of the popular LNER PW hut.
Not my scale but interesting to see how it goes. Is it still all MDF construction or are you using a mixture of MDF and card/mountboard?

I've just got some oiled manilla card to experiment with. It cuts very cleanly with little scorching.
 
Top