7mm Faymouth High Street Station

Compton castle

Western Thunderer
I’ve decided to make some alterations to my layout plans, instead of modelling the front end of an engine shed one side of the room and the rear of the shed on the opposite ( The rear will continue in my separate Smoke ash and steam thread ) I’ve decided to do the approaches to a large station,
I think this will better utilise the track, Buildings and signalling I had from my aborted Ranelagh Bridge project.
The station area scenically will be 12’ long with 4’ of storage, It will mainly consist of light engine movements but a station will allow me to pose some of my rolling stock where a shed would have prohibited that.
62E133D5-A4F3-4CB5-8D4B-B21C803ECB6C.jpeg
Looking towards the storage roads, A large bridge will be the scenic brake, single slip needed on the left and a RH point on the right given access to 5 storage roads. 47D2F8E6-A484-4E4F-8096-E570CE5E8ED1.jpeg B01BAD15-7EC9-4BD0-B9BA-5E46882265A2.jpeg
New daylight bulbs fitted, I’ll change out the other bulbs to these, 11F62C6F-86B3-44A2-971A-9B75D874AF47.jpeg
Looking towards the station, that will have two platform faces and two through roads.
 
Top