Heljan Class 20 cab access

Discussion in 'Techniques' started by TheSnapper, 3 February 2020.

  1. TheSnapper

    TheSnapper Western Thunderer

    Does anyone have a technique for getting inside the cab of a Heljan Class20, in order to detail, add crew etc.

    I feel certain that the design has changed since I first had one some years ago.

    Do I need to resort to cutting a hole in the floor?

    Tim, in anticipation...
  2. Ressaldar

    Ressaldar Western Thunderer

    Hi Tim,

    from memory, the two large windows on the rear elevation are fitted from the outside and therefore it should be (relatively) easy to prise them off and you then get access to a screw either side of the bulkhead, loosen those and the cab should lift off. But my memory is not as good as it was - so I might be wrong, as usual.

    Best of luck and posted with good intentions

  3. TheSnapper

    TheSnapper Western Thunderer

    Thanks Mike

    I remember now! (must be an age thing.....)