LMS Signals

[micknich2003]

[attachimg=2][attachimg=1]
I' don't usualy model in 7mm but I think my mate "7mm Mick" is going to change that. The two attached pictures are one of my few efforts in the larger scale, both built for the same layout ten or more years ago. Both are from an actual location and I was lucky enough to get copys of the actual detail drawings for the specific signals. Far easier then working to a generic "Type" drawing and a few photo's Mick.

 

[Pannier Tank]

Excellant as always Mick 

 

[7mmMick]

Top draw  as always Mick, are we going to see a thread on the Holderness Drain signal  ?? Looking forward to Doncaster Show, see you there for a brew on Sunday,

Best regards Mick

 

[micknich2003]

David thanks for your kind words.
Mick, when the time comes, I will start a thread on the "Holderness Drain" bracket signal, but first I will need to buy in a few 7mm signal arms. Looking forward to Sunday, I understand "Father Neil" is paying for the tea, coffee and buns.
I forgot to mention, both ladders were "Home Brewed" I drilled them on the milling machine. Best Wishes, Mick.

 

[28ten]

Very impressive! I think the work on the ladders was time well spent as they do look good.

 

[micknich2003]

Very impressive! I think the work on the ladders was time well spent as they do look good.

Yes, I have also done similar 1:32 scale signals, I dont bother in my usual 4mm scale, I just beef up the etch with 0.3mm wire. Best Wishes, Mick.