Silhouette Cameo Cutter - the journey.

Discussion in 'CAD Corner' started by Rob Pulham, 1 October 2015.

  1. Rob Pulham

    Rob Pulham Western Thunderer

    In between building the Kirk coaches I have also been assembling the other exNBR bogie CCT. This one will be finished in LNER livery for my own stock.

    In NBR and LNER days the side panels were all half beaded this has been added using 0.8mm half round Plastruct strip.

    IMG_4224_zps15oxrwwo.jpg

    Although I will be making the sole bars from plastruct strip they are too long to make it out of one length so it will need to be joined.

    In order that this isn't visible on the finished model I plan to draw up and cut some 10 thou overlays. Which I plan to rivet in the same manner as the tar tank. This is in the hope that it will save me from drilling, cutting and inserting the many stubs of rod that would otherwise make up the multitude of bolt/rivet heads visible on the sole bars.
     
  2. Rob Pulham

    Rob Pulham Western Thunderer

    Hi All,

    Just a reminder to anyone in the vicinity that I will be demoing Inkscape and Silhouette Cutting at the Stainmore Railway in Kirkby Stephen this coming weekend and I look forward to seeing and having a natter with any one who pays a visit.
     
  3. Rob Pulham

    Rob Pulham Western Thunderer

    The Cameo demo was well received with lot's of interest from both people who had never seen one before and a few people who had machines but hadn't really done much with them.

    It must have been viewed as a success because I have been invited to do another demo at next year's show.
     
    daifly likes this.
  4. Rob Pulham

    Rob Pulham Western Thunderer

    In response to a query on the GOG forum I promised that I would take a photo of some Kirk sides that I needed to cut and shut and repair the beading on - The beading is Plastruct 0.8mm half round.

    It looks like Ian has now run out of the colour pigment that he used to use to colour the LNER coach pieces because they came in white so I had to give them a quick spray to get them to show anything.

    IMG_4572_zps9intdfju.jpg

    IMG_4573_zpsxgnnlx1a.jpg

    I have marked which beading I replaced with a red square. For some reason the top one picked up some much in the solvent (Limonene) which has made it look a bit ragged in the photo but I am sure that it will disappear once I apply the teak varnish to it.

    Although it doesn't look it in the photo the base colour is orange.
     
    chrisb and Dog Star like this.
  5. geoff_nicholls

    geoff_nicholls Western Thunderer

    Been rereading this thread as I'm thinking of buying a Silhouette Cameo myself. They seem to be selling a Cameo 3 now, does anyone know if there's much difference between a 2 and a 3?
     
  6. David Varley

    David Varley Western Thunderer

    Geoff,

    Have a look at The New Silhouette Cameo 3 Compared to Silhouette Cameo 2! and please see the message I've just sent you.

    Regards,

    David
     
  7. Rob Pulham

    Rob Pulham Western Thunderer

    Just reviving this thread because I have just spent a really enjoyable two days demoing my cutter at the Normanton and Pontefract show.

    We had lot's of interest throughout the weekend and it was great to put names to faces of fellow forum members, Sean (@The Penguin Of Doom), Rob (@Lord Flashheart), David (@Jinty), Gary (@cmax) plus quite a few guild and RMweb members who may not post on here.

    Chris was asked to bring along some paintings and prints today and there was a lot of interest in them too.

    Thank you to all who dropped by to say hello, an apologies to anyone who I have missed. It must have been well received by the show organisers because we have been invited back next year to demo again.

    The next Silhouette Demo is at the Guild Summer show in Doncaster anyone who is going do please drop by and say hello.
     
    cmax, lankytank and BrushType4 like this.
  8. cmax

    cmax Active Member

    Hi Rob,

    Great to meet up with you and Chris yesterday, some fantastic modelling and artwork on display, you are a very talented couple!

    Very impressed with the Silhouette cutter, certainly got the grey matter thinking and most of all, got the modelling mojo back again.

    Regards,

    Gary
     
    Rob Pulham likes this.
  9. Rob Pulham

    Rob Pulham Western Thunderer

    Hi Gary,

    It was good to meet and chat with you too, I am really pleased to hear that the show restored the mojo. Chris and I are worn out but very satisfied with a very enjoyable weekend.
     
  10. Rob Pulham

    Rob Pulham Western Thunderer

    While cutting some battery box straps for the Kirk Twins I decided to have a dabble with some lettering in styrene. It was brought to mind by Mike Osborne's request for the loco lettering.

    Not needing any that said loco specifically I did some potential platform/signal box signage although in hindsight they may be a little on the big side - each letter is 8mm high.

    I plan to make a sign board for them but for the purposes of the photo they were placed on my scanner bed back to front to give the following result.

    Tedcaster letters.jpg
    They are cut from 10 thou styrene.
     
    cmax, Bewdley train and BrushType4 like this.
  11. Rob Pulham

    Rob Pulham Western Thunderer

    I have just added a further Silhouette Demo to the diary. - The Thirsk show on 29th of July.

    If you are in the vicinity do pop along.
     
  12. Rob Pulham

    Rob Pulham Western Thunderer

    A minor set back this week. I spent most of last weekend making a new display stand for use at Donny show. The plan was to fit home made track. I had the rail to hand but sadly turning the house upside down hasn't revealed the safe place where I put the sleepers and chairs after painting/staining them. Grrr!!:headbang: