Talerddig Mk ll (micro layout)

Discussion in 'Layout Progress' started by matto21, 23 July 2017.

  1. matto21

    matto21 Western Thunderer

    Hi all,

    Having been inspired by the layouts, big and small, here (and elsewhere), I've decided to bite the bullet and have a go myself.

    As space and motivation won't allow a large layout, I thought I would focus on something small. I had a layout (some may remember Talerddig) but that was a long time ago and as I've not done much modelling in the interim years, I want to have a go at something small I can work on indoors (on the table!).

    The trackplan I'm working to is mocked up below and is dictated by what I have available. Points will be Peco Code 75 and plain track is C&L.

    The top right track will be to "a fiddle yard" (one day) and everything else sidings so I can use my existing freight stock.

    Progress won't be fast, but I'm going to give it a go!

    Matt

    IMG_20170723_125744671.jpg
     
  2. ceejaydee

    ceejaydee Western Thunderer

    I plan on paper, build the board then generally modify the plan on the board, then explore all the other possibilities on the same plan, do a temporary wiring job, start to play and get no further :confused:

    Lot to be said for a simple micro as a test bed, for running some stock and as a scenic photo backdrop.
     
  3. matto21

    matto21 Western Thunderer

    I don't even get that far usually!

    Couple of hours of dodgy woodwork later...

    IMG_20170723_162634490.jpg
     
    ceejaydee, John Rich and jonte like this.
  4. matto21

    matto21 Western Thunderer

    Bit of progress...

    IMG_20170723_175210990.jpg
     
    John Rich and jonte like this.
  5. jonte

    jonte Western Thunderer

    Will the theme be BR blue again, Matt, set in an isolated Welsh setting?

    I sincerely hope so.

    Glad to see some progress.

    Regards,

    jonte
     
  6. ceejaydee

    ceejaydee Western Thunderer

    I thought that you were building a layout..... not a shelf :D
     
    40126 likes this.
  7. matto21

    matto21 Western Thunderer

    Hi Jonte - that's certainly my plan - run down and overgrown!

    That's Plan B!
     
    jonte likes this.
  8. matto21

    matto21 Western Thunderer

    Building underway. If I don't watch out, I might actually make progress here!

    IMG_20170725_225818160.jpg
     
    Wagonman, Geoff, John Rich and 6 others like this.
  9. ceejaydee

    ceejaydee Western Thunderer

    ..and he nailed the planks on himself :thumbs:
     
  10. matto21

    matto21 Western Thunderer

    In the time it's taken me, I probably could have!

    I accept a structure this small wouldn't have had two chimney pots but it looked wrong without!

    IMG_20170727_183334765.jpg

    IMG_20170727_183326970.jpg
     
    john lewsey, Geoff, John Rich and 2 others like this.
  11. matto21

    matto21 Western Thunderer

    Remade. Came to the conclusion that V1 was out of proportion and scale.

    IMG_20170729_145454224.jpg
     
    Wagonman, Geoff, jonte and 2 others like this.
  12. matto21

    matto21 Western Thunderer

    Here's the kind of presentation I'm going for. Actual backscene will hopefully be curved.

    IMG_20170730_182314052.jpg
     
  13. ceejaydee

    ceejaydee Western Thunderer

    Liking your progress :thumbs:

    That is something that I must try at some point, not only to frame the scene but also for dust and environmental protection.
     
    matto21 likes this.
  14. matto21

    matto21 Western Thunderer

    Forgot this pic...

    IMG_20170730_192004389.jpg

    It's still pretty light as well.
     
    John Rich, MartinWales and BrushType4 like this.
  15. matto21

    matto21 Western Thunderer

    I've dug out this Wills Platelayer Hut kit to practice some paint effects on the roof. Hopefully this resembles rusty corrugated iron...

    IMG_20170809_172348702_HDR.jpg

    IMG_20170809_172406308.jpg
     
    40126, Pencarrow, Geoff and 1 other person like this.
  16. jonte

    jonte Western Thunderer

    Absolutely!

    Pray tell, Matt, how did you pull it off?

    I'm guessing grains of salt?

    jonte
     
  17. matto21

    matto21 Western Thunderer

    Thank you Jonte. AK Interactive Worn Effects actually!

    Here's the thing almost finished.

    IMG_20170809_193216157.jpg

    IMG_20170809_192735864.jpg

    IMG_20170809_192748626.jpg

    IMG_20170809_192742754.jpg
     
    40126, Geoff, Lyndhurstman and 2 others like this.
  18. jonte

    jonte Western Thunderer

    I see.

    Think that's stuff I bought a while back which I've yet to use, but which is the industry's answer to the hairspray technique if it's the same product.

    From my American friends, I believe it's easier to use and provides a finer 'blistered(?) effect than the cheap hairspray. Your photos would bear testament to that if so.

    Did you use acrylics, Matt, as I've yet to see it used with enamels which I prefer?

    Nice work all the same.

    Best wishes,

    jonte
     
    matto21 likes this.
  19. matto21

    matto21 Western Thunderer

    Hi again Jonte,

    Yeah, basically it is hairspray in a jar with an extra few £££'s added on! Having said that, I've used hairspray in the past and in my opinion, this is much easier to use.

    I always use acrylics for painting. I'm not sure this would actually work with enamels because you need to use water to produce the "worn effect". I can't see that water would penetrate the enamel top coat but I'm sure someone will prove that wrong!

    Matt
     
    jonte likes this.
  20. jonte

    jonte Western Thunderer

    Yep, that makes sense, Matt.

    Thanks for letting me know.

    Regards,

    jonte