A bit more work on the Portakabin.
The building was glazed last night and today I attended to the roof.
Some styrene strip was laid around the edge of the roof to create a lip, painted with Woodland Scenics asphalt paint and whilst wet sprinkled Woodland Scenics fine soil turf. When dry I zapped it with a rattle can varnish to seal it. After this it was then dry-brushing and washes. The roof and supports are not permanently fixed yet.
And finally the door....
.....I gouged out some of the MDF from the bottom then stuck a layer of paper over the door. Once this was dry I cut the paper with a knife over the gouged area pushed this in as if it had been 'kicked in'. I also attacked the door with a blunt instrument. Once completed the door was painted followed by washes and dry-brushing.
The door handle was made up from bent wire and the escutcheon plate from styrene. The sweep at the bottom of the door was made from styrene and painted with Tamiya Flat Aluminium
The door ajar here shows the 'aluminium' sweep at the bottom of the door.
Still to be made are the steps, window security grilles and an electrical junction box.