Brushs Laser Cutting and 3d Printing workbench

Osgood

Western Thunderer
Is there any way you could adjust the laser setting or use a filter to give a 'fuzzy' beam (a great techy word, eh?) or similar in order to achieve a radiused trough effect, like this? Would be fantastic for random stone!



Stone cut.jpg

You can tell I know JS about lasers.......
 

BrushType4

Western Thunderer
Is there any way you could adjust the laser setting or use a filter to give a 'fuzzy' beam (a great techy word, eh?) or similar in order to achieve a radiused trough effect, like this? Would be fantastic for random stone!



View attachment 128440

You can tell I know JS about lasers.......
I can do that. It’s laborious work to create the artwork. Essentially, I have to create layers of greys to represent the power of the laser.
 

BrushType4

Western Thunderer
Sorry Phil
I posted before finishing my message. Blame not the red wine - just the quantity thereof!
Dave
I could engrave that for you. My work would be a bit flatter, but with good painting, it would look like your example. What scale are you working in?
 

daifly

Western Thunderer
Thanks Phil. I need to do some maths. I'll get back to you in due course. I shall need 2.5 - 3 metres of it so there will be a few joins!
Dave
 

Yorkshire Dave

Western Thunderer
7mm. If I was to sketch/give dimensions for the infilled arches, presumably you could produce the whole side of the viaduct?I don’t need the provision for shops/businesses as I have to lose the road sadly.

Shame you have to lose the road - could have trams and granite setts as well!

The second 1920-30s photo is excellent for the plethora of detail.
 
Top