Search results for query: templot

  1. simond

    Grahame's N/2mm bashes

    I recall that Martyn Wynne did an article on Gimp in the Templot forum, it has some amazing capabilities for a freeware suite. I’ve played a little with it, but it’s not my thing really.
  2. OzzyO

    7mm Lochmaben, a new layout.

    ...all look, but it looks like that I'm going to have a bit of work to do to get the track to flow on to the yard track. The first of the Templot plans for the station fiddle yard in place. With most if not all of it's copper clad sleepers in place. Not sure about the fellow he just got...
  3. dibateg

    7mm The Derby Line: Basford North

    As you probably know the track plan was done with Templot and Jim G of this parish kindly refined the design with transition curves. It does mean that you cannot fit quite as much in, but the protoypical flow of the track makes up for that. In the meantime I've been experimenting with the...
  4. Tony Overton

    A LITTLE POST CHRISTMAS PROJECT

    ...– why throw them away if they can be re-used. The MR chairs are by Exactoscale (7CH103A), as are the fish plates. I could have used Templot to help me with sleeper spacing but with so few sleepers I decided to set them out using a ruler – most are to MR 1885 30ft 85 lb rail sleeper spacing. I...
  5. Mudhen

    Brushs Laser Cutting and 3d Printing workbench

    ...can be speeded up, so shortly the experiment begins. Any errors you see are down to me and not Phil. I recently spent some time learning Templot ( thank you Martin Wynne) and the track plan I devised was sent to Phil for cutting. I'll start a thread on this in the New Year. Happy Christmas to...
  6. cbrailways

    Queensbridge Road Wharf

    No problem John. Go ahead.
  7. john lewsey

    Queensbridge Road Wharf

    Hi could I pm you my Templot plan John
  8. OzzyO

    7mm Lochmaben, a new layout.

    ...The curved double slip looks like it will be fun!! I'm not that sure what he's up to here apart from checking out some point vees. No Templot on this bit of the yard so it's going to be fun getting the track centres in the correct place, but the boy will be able to manage it I'm sure...
  9. daifly

    S7 Track templates?

    I've had a reply from Martin Sure. You can do anything you like with Templot output except claim your own copyright on it. But thanks for asking. Bear in mind that if you supply a library of PDF files from Templot, you lose the option to do a printer calibration for accurate printing. If...
  10. Michael D

    S7 Track templates?

    Bill thats fabulous, thanks ever so much! best wishes Michael
  11. daifly

    S7 Track templates?

    ...B6, B7, B8, B9, C10) library could be created. Although it would provide a quick-start option for S7 track building, it is the huge power of Templot to create templates of almost every conceivable configuration that is its great strength. From a curved single slip to a custom tandem turnout...
  12. Bill Campbell

    S7 Track templates?

    Hi Michael One of the first things I did with my Mac was to install more memory. Some Templot templates attached as pdf files - I think the file names are self explanatory. Regards.
  13. Bill Campbell

    S7 Track templates?

    ...Have you considered running Windows via Bootcamp on your MacBook if it has an Intel processor? You would then be able to instal and run Templot for yourself - this works well for me on my Mac. The reason for suggesting this is that printable files are dependent on the accuracy of the...
  14. Michael D

    S7 Track templates?

    ...for some s7 track templates online, cant find any??? coupled with the joys of MacBook especially with the Monterey operating systems vs Templot could I ask a favour?? Could somebody send me a printable file of a B6 Right hand and some plain track please. Or even a source that has them online...
  15. Simon

    1/32 Gauge One 1:32 Finescale Group

    Templot apart, what will make the idea much more doable is to use small items of rolling stock, pre grouping, light railway etc. If you search for "Pomparles Siding" on WT you will find quite a lot of references to small G1 stuff to proper standards, John Dale built a lovely little yard for...
  16. IanB3174

    1/32 Gauge One 1:32 Finescale Group

    That's fine with me, add away. I shall have a play with Templot and see what I can fit in a 1/32 pint pot. dec17@me.com
  17. OzzyO

    7mm Lochmaben, a new layout.

    ...we are dealing with BBJs in the fiddle yard two copper clad strips laid just inboard of the BBJ. when the trackwork is finished on the BB the Templot plan will be removed and the end sleepers Epoxied and pined down. This photo is to just show how much track we are aiming for in the fiddle...
  18. NewportRod

    Laser cut timbers from Templot dxf

    Thank you Martin, I had obviously overlooked that setting in Templot - and also the second chance I had to avert the problem in the dxf file. I'm not blaming anyone other than myself; in making this post I just wanted to avoid others making the same mistake. Your ongoing developments are very...
  19. martin_wynne

    Laser cut timbers from Templot dxf

    @NewportRod Hi Rod, It certainly is intended to be used that way. But why-oh-why don't folks get involved on the Templot Club forum and keep track of developments? For the last 3 years I have been making many, many changes to the DXF output in connection with 3D printing and laser-cutting...
  20. NewportRod

    Laser cut timbers from Templot dxf

    A number of companies are offering services where they cut ply placed on the output from Templot. This is an excellent service which I've used in both 4mm and 7mm and saves a lot of time. I have just noticed a little "design feature" that some of modellers, especially those working in the...
Top