File jig for tiny cylindrical parts

[michael080]

michael080 submitted a new resource:

File jig for tiny cylindrical parts - File jig for tiny cylindrical parts

This little jig may help to plane the raw ends of tiny cylindrical parts. Choose the correct diameter hole (from 1 to 3mm) for a snug fit and choose the correct row for the desired length (0.2 to 3.1mm) of the final part. Keep the file flat on the surface to avoid extensive abrasion of the jig.

Prints nicely with a resin printer. The tiny holes may be problematic with a FDP style printer.

Read more about this resource...

 

[daifly]

Thanks Michael.

I printed it on my Bambu A1 with a 0.2mm nozzle fitted and 0.1mm layer height.

I'm very pleased with the result! To put things in perspective for others, that print is 50mm x 50mm!



Cheers

Dave

 

[RichardG]

Dave thank you so much for posting a photo of the tool.

If anyone would be prepared to print me one then please do get in touch!

 

[daifly]

Richard

I'll happily print and send you a set - there are 6 plates in the set giving a range of filing thicknesses. I am experimenting with layer thickness at the moment but inevitably it considerably increases the print time. At least I can set and forget the print process then get on with something else.

If you PM your address details I'll put a set in the post to you, probably at the weekend.

Dave

 

[RichardG]

A set of five holding jigs printed for me by Dave @daifly. Each jig is tapered to give five different lengths for components, and so there are 25 available lengths in all.

Thank you Michael @michael080 and Dave.

 

[paulc]

Can i put my hand up for a set . I don't have a printer and i don't know anybody that does .
I will pay for it plus the postage to Australia.