The Armstrong Goods engine is the foruner of the popular Dean Goods modelled in many scales, this is a G3 version and built using a CNC mill. There are no castings available for this engine so all the parts are machined on the mill
The inside motion is fully working and can be seen as there is quite a gap bellow the boiler barrel. The steam dome is turned from 2in dia brass with the flange formed over a piece of steel bar the same dia as the boiler barrel, the chimney and the safety valve bonnet were also turned from solid.
Mike
The inside motion is fully working and can be seen as there is quite a gap bellow the boiler barrel. The steam dome is turned from 2in dia brass with the flange formed over a piece of steel bar the same dia as the boiler barrel, the chimney and the safety valve bonnet were also turned from solid.
Mike