SERVO TURNOUT/POINT ACTUATOR for S7

[ICH60]

Hi
On this web page Servo Turnout/Point Actuator,
There is a Youtube video

.
It seems to me that they are a very clever design

James the proprietor is willing in to make a Scaleseven version for me.
The question is what spacing for the holes for the wires that come up to the point blades.
Anyone have any thoughts?


Ian

 

[Tim Humphreys ex Mudhen]

I would suggest the spacing as 33mm minus switch rail/stock rail clearance of 2,5mm, 30.5mm Then subtract twice the thickness of the switch rails from 30.5. in order that the wires come up on the inside edge of the switch rails. In order to fine tune the spacing the wires can be bent to suit the situation. Scaling up the S4 dimension gives 30.625mm.

Tim