LarryG
Western Thunderer
I started by modifying the steps by removing a side screen (the producer kindly supplied two so I could make a stand-alone staircase) and then gluing them to the underside of the platform....
Railing were fabricated from 22 thou scrap brass soldered together and sunk into slots in the wall to act as a sturdy backing onto which I glued laser-cut wood railings. This Cambrian box has joined the queue for painting....
A last minute alteration to strengthen the platform as per photos of the prototype...
Thanks once again to Rail Model for providing the basics needed for this project.
Painted and completed 1st November 2020....
Railing were fabricated from 22 thou scrap brass soldered together and sunk into slots in the wall to act as a sturdy backing onto which I glued laser-cut wood railings. This Cambrian box has joined the queue for painting....
A last minute alteration to strengthen the platform as per photos of the prototype...
Thanks once again to Rail Model for providing the basics needed for this project.
Painted and completed 1st November 2020....
Last edited: