Resin Buildings - Getting Them Cleaned Up Prior To Assembly

[Rob Pulham]

I have recently been assembling some of the Skytrex resin buildings and to be fair most went together well but the water tower base has proved a bit of a challenge so I made a jig to assist with getting the resin sides and ends to the correct angle.




Made up from a few of the off cuts from the baseboards, with some wet and dry stuck down with double sided tape.

 

[BrushType4]

Rob,

That is a good idea.

 

[Steve Cook]

Very nifty Rob
Definitely a method to store for the future

 

[Dog Star]

Ah... when I read "cleaned up"... I thought it meant something like washing the parts before gluing them together....

Still at The Back.....

So did I - and so am I... are you the one with the buttonhole?

 

[Rob Pulham]

Ah... when I read "cleaned up"... I thought it meant something like washing the parts before gluing them together....

Still at The Back.....

So did I - and so am I... are you the one with the buttonhole?

Ahh yes, but then that's how we speak round ere...... Sorry for any confusion