geoff_nicholls
Western Thunderer
This is an appeal to fellow Turbocad users. I'd like to have Shapeways print a complicated driving wheel splasher, but I've had some expensive mismatches with 3D printing in the past with curved surfaces being printed a multifaceted polygons. It may be that I'm getting the same problem with Shapeways
I thought I'd run a test, I used the 3D cylinder command, to create a cylinder:
but when I save this as an STL file then open it in AXON2 it looks like this:
and after uploading in Shapeways:
I'm using Turbocad Professional 19.2 64-bit
Am I panicking unnecessarily, or would it actually come out like an elongated threepenny bit?
I thought I'd run a test, I used the 3D cylinder command, to create a cylinder:
but when I save this as an STL file then open it in AXON2 it looks like this:
and after uploading in Shapeways:
I'm using Turbocad Professional 19.2 64-bit
Am I panicking unnecessarily, or would it actually come out like an elongated threepenny bit?