7mm Ranelagh Bridge west London Stabling point 1959/1964

[OzzyO]

Buy them in the 1000s not just in the 100s.
I've had a look in the Swindon drawings from page 979 down to 400 and found a few drawings of the 94XXs. If you'd like to have a look from page 1 up to 400 that should cover it.

 

[Compton castle]

Thanks for the drawings Paul, they will come in very handy.
I'm going to have a crack at two points my self, I've got the plans here ready so the timbering is now done and they can have a coat of stain later on today.

 

[Compton castle]

Sleepers for the two points are now in place.

 

[Scale7JB]

9466 is in bits at the moment for overhaul if that helps...

JB.

 

[Compton castle]

9466 is in bits at the moment for overhaul if that helps...

JB.

Thanks
I follow their Facebook page and they have loads of really good pictures

 

[Compton castle]

Time to build a Box Van

 

[Compton castle]

 

[pete waterman]

There's 4 minutes, 27 seconds worth here....

Regards

Dan

This film has some real rear items. The main train is the Articulated set The only know footage of it also the sreamlined castle and lots of shots of the carriage interiors.

 

[Compton castle]

Plate shopping again!!

 

[Compton castle]

A 56 for Ranelagh Bridge??? You must be mad??

 

[Compton castle]

A little project I'm working on for Phil of intentio,
Back to Ranelagh Bridge and the ATC ramps have arrived,. A must for layouts of a GW origin. Lovely 3D printed details Available from Off the Rails on Shapeways. ATC ramp, they're long!!

With the 3D printed chairs added and some paint, needs the T section added along the top next.
I will rub the sides down to get them to fit the brackets as this time I just shaved a bit out. The T section will hide that. As these are the prototypes the next batch will be done in 2mm thicknesses. They are available from Phil @ Intentio. A lovely detail I've not yet ever seen.
Il pop some pictures up of the shed test ramps as well

 

[Compton castle]

We now have the T section on the first ATC ramp.

 

[Compton castle]

Plastic arrived to represent the concrete trunking, here it is cut to size

 

[Compton castle]

A slight distraction and back to the diesel shed, a dry run construction after paint. Il start glueing it together tomorrow. Glazing will arrive soon and I will get it finished. It should be on the Intentio stand at Telford

 

[Compton castle]

In Bygones Torquay,

 

[Compton castle]

Yours truly on the footplate of Dinmore Manor Monday morning, I had a footplate trip from Paignton to Kingswear, excuse the cheesy grin

 

[OzzyO]

Nothing wrong with a cheesy grin on this occasion.

 

[Alan]

My Dinmore Manor

 

[Compton castle]

If I have a manor I'm pretty certain it would be the same one

 

[scott]

Superb pictures and the build is looking good. I love the pic of your castles, very jealous