Latest activity
-
Wow didn’t realise it’s been that long since I updated, the layout had returned to the loft few weeks after the last post, I’ve been... -
I'm back in Chicago this week but before I arrived I spent part of the weekend fitting a Tsunami 2 decoder into an Atlas GP60 (yes... -
richard carr replied to the thread 7mm Richards P48 US Thread.I'm back in Chicago this week but before I arrived I spent part of the weekend fitting a Tsunami 2 decoder into an Atlas GP60 (yes... -
-
daifly reacted to Scale7JB's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with
Like.
Exciting stuff! JB. -
Ressaldar reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
The 2 fiddleyard boards (900 x 400mm) have been assembled, the brass pattern makers dowels fitted and the legs glued and screwed. So... -
AJC reacted to 40057's post in the thread Tom Mallard’s Workbench - P4 K1 - Clockwork LNER Q1 and Van Riemsdijk motor with Like.
To describe the Q1 motor as a ‘van Riemsdijk’ is still true, but no longer the whole truth. It is fair to point out that commercial...
-
Today’s steed and location; Linda at Glanypwll… Nigel
-
Scale7JB replied to the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge.Exciting stuff! JB. -
Scale7JB reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
The 2 fiddleyard boards (900 x 400mm) have been assembled, the brass pattern makers dowels fitted and the legs glued and screwed. So...
-
Scale7JB reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
The two scenic boards have just about been finished and the pattern makers dowels aligners fitted and everything aligns! That's a...
-
Scale7JB reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
This type of baseboard is braced to within an inch of it's life. The tape simply holds the joints closed whilst the glue goes off. BTW...
-
Scale7JB reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
The first board is pretty well complete now. The instructions tell you to fit the horizontal triangular corner braces at the top rear at...
-
Scale7JB reacted to daifly's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
This is the problem with fitting the corner braces afterwards as the instructions say: You cannot insert both tongues simultaneously...
-
Scale7JB reacted to Yorkshire Dave's post in the thread Sir Lamiel’s 777 Quest - A Scale7 Micro Layout Challenge with Like.
How light, kg? What are these built from - looks like Dreadnought belt armour :). Given the number of lightweight products around...
-
I have now added all of the detail onto the driving end and have ventured to assemble the different sub components. I’m quite pleased...
